danielrosehill/storage-container-dimensions

Industrial Storage Container Dimensions

Planning-grade volumetric reference for the plastic containers that European and North American warehouses actually run on: Euroboxes (Euro stacking containers), attached-lid containers (ALCs), and VDA 4500 KLTs.

Two tables:

Config	Rows	What it is
default → containers.csv	48	One typical row per nominal size. External and internal dimensions, usable capacity, the spread of what vendors publish, lid and nesting behaviour, standards conformance
listings → listings.csv	121	The individual vendor listings the typical figures were generalised from. Real SKUs, real prices, the date each was captured

from datasets import load_dataset

typical  = load_dataset("danielrosehill/storage-container-dimensions", split="train")
listings = load_dataset("danielrosehill/storage-container-dimensions", "listings", split="train")

Prefer it on paper? The same data is rendered as an 8-page printable reference — every size, its typical internal dimensions, its usable capacity and the vendor spread, divided by family: reference/storage-container-reference.pdf.

The second table is there so you can audit the first. Every typical capacity is a judgement call about a spread of real products; listings.csv is that spread, with URLs and capture dates, so you can disagree with a number and see exactly what it was averaged from.

The point of it

If you are costing out a purchase or sizing a shipment, you need to know that a 60 × 40 × 23 cm Eurobox gives you about 42 litres, not the 55.2 litres that 60 × 40 × 23 implies. Multiply external dimensions and you will overstate what you are buying by roughly a quarter — and you will overstate a tapered ALC by more than a straight-walled Eurobox, which quietly corrupts any comparison between the two.

That gap is the whole reason this dataset exists.

Read this before using the numbers

The standards fix external dimensions. They do not fix internal ones.

ISO 3394 defines the 600 × 400 mm packaging module. EN 13199 caps a small load carrier at that footprint. VDA 4500 additionally fixes three external heights (147.5, 213, 280 mm). None of them specifies wall thickness, draft angle, rib design or base construction — those are the manufacturer's choice, and they are what determine internal volume.

So every internal dimension and capacity here is a typical figure averaged across vendor catalogues, not a specification. Ten vendors will give you ten different numbers for the same nominal size, and the spread is not small: across the four catalogues captured here, a 60 × 40 × 32 cm Eurobox is quoted internally at anything from 60.4 to 66.4 litres. That is an 11 % range on a box every one of them calls 600 × 400 × 320. vendor_capacity_low_l and vendor_capacity_high_l give you the range on every row rather than hiding it behind a single figure.

That is a limitation of the product category, not of this dataset. Chasing manufacturer-exact figures is not achievable in a general reference, and would be obsolete the moment a mould changed. Use these for calculation, comparison and planning. Check the specific supplier's own internal dimensions before committing to a large order.

Fields

Field	Notes
id	Stable slug, e.g. euro-600x400x230, alc-600x400x310, vda-rklt-6429
type	euro_stacking_container · attached_lid_container · vda_klt_container
type_label	Human-readable form of type
common_names	Semicolon-separated search terms, ordered most standard to most colloquial, including regional ones (Eurobehälter, bac gerbable) and genericised vendor names (Hudson box). Search terms only — never discriminate families on them, see guidance/naming.md
external_length_cm / external_width_cm / external_height_cm	External, in cm
external_volume_l	L × W × H. Not what the box holds
internal_length_cm / internal_width_cm / internal_height_cm	Typical internal, in cm. Populated for every Euro row and for the two KLT sizes a vendor publishes; empty for ALCs — see below
internal_dims_basis	Where those internal figures came from: vendor_average_rule, vendor_published, not_published, not_published_tapered_walls
internal_dims_vendors	How many vendors publish internal dimensions for this footprint. Vendors, not listings — one mould in five colours is one opinion
typical_capacity_l	The usable number. Always populated
vendor_capacity_low_l / vendor_capacity_high_l	Capacity implied by the least and the most generous vendor's own published internal dimensions for this footprint. Empty where no vendor publishes any. See guidance/internal-dimensions.md
usable_ratio	typical_capacity_l / external_volume_l
capacity_basis	How the capacity was arrived at — see below
lidded	True where a lid is integral to the product (ALCs)
lid_available_separately	True where a lid exists but is a separate purchase
nestable_when_empty	True for ALCs; straight-walled boxes stack but do not nest
typical_nesting_ratio	Fraction of its own height a nested empty box saves. 0.75 for ALCs, 0 for everything else — that is a fact about a straight-walled box, not missing data
standard_conformant	Whether the footprint conforms to a recognised module
standard	Which one, stated precisely
vda_4500_height	Whether the external height is on the VDA KLT grid
eur1_pallet_per_layer	Boxes per layer on a 1200 × 800 Euro pallet, no overhang
listings_observed	How many rows in the listings table back this size — 0 means the row is a plausible interpolation, not something seen for sale
notes	Per-row caveats. Read these

Height coverage

The Euro series carries the heights actually observed for sale across the captured vendors, near-duplicates merged to the round figure (315 → 310 mm, 365/370 → 365 mm, 415/420 → 420 mm):

Footprint	Heights (cm)
60 × 40	12, 15, 17, 17.5, 20, 22, 23, 24, 27, 28, 30, 31, 32, 34, 36.5, 40, 42, 46.5
40 × 30	12, 15, 17, 20, 22, 23, 24, 27, 32
30 × 20	12, 15, 17, 22
80 × 60	22, 32, 42

Unlike the VDA grid, no standard defines the consumer Euro height series — it is whatever manufacturers converged on, which is why it is irregular and why "common" here means "seen on sale" rather than "specified". Check listings_observed before treating any single row as a size you can definitely buy; a handful (60 × 40 × 30 and × 46.5, 40 × 30 × 20 and × 24, most of the 30 × 20 range) are interpolations into gaps in the captured evidence.

capacity_basis values

• derived_from_internal_dims — computed from the typical internal footprint for that module (600 × 400 boxes are internally ~550 × 355 mm, 400 × 300 are ~350 × 250 mm, 300 × 200 are ~260 × 160 mm, 800 × 600 are ~750 × 550 mm, with internal height 10–20 mm under external). These are the conservative end of what vendors publish, not the middle of it; vendor_capacity_low_l and vendor_capacity_high_l on the same row show what the market quotes.
• vendor_nominal — the manufacturer's published capacity. Used for all ALCs.
• published — a directly published internal figure (VDA R-KLT 6429).
• derived_from_klt_ratio — scaled from the 6429 anchor at its 71.4 % usable ratio. VDA KLTs are thicker-walled than consumer euroboxes, so the euro rule does not apply to them.

Vendors disagree about the inside of the same box

By 11 % in litres, at 600 × 400. Salesbridges publishes 570 × 370 mm internal where Plastic Box Shop publishes 555 × 355 and Yosibox 550 × 360 — the first is the top opening, the others are close to the base, and a euro crate is slightly tapered, so all three are honest. vendor_capacity_low_l and vendor_capacity_high_l carry that spread on every row; typical_capacity_l sits at or just below the conservative end on purpose, because a planning figure that overstates capacity fails silently.

The full evidence, per vendor and per footprint, is in guidance/internal-dimensions.md.

Why ALC rows still have no internal dimensions

ALCs taper. The walls slope inward towards the base so the containers nest when empty. A single internal L × W × H would be wrong wherever you chose to measure it — right at the top opening, badly overstated at the base. Rather than invent a number, those rows carry the vendor's nominal capacity, which already accounts for the taper and is the figure you should actually plan against.

KLTs now carry vendor-published internals at the two sizes a captured vendor publishes them for (vda-rklt-6429, vda-rklt-4329). The other five heights are still empty: nobody in listings.csv sells them with a spec sheet attached.

The listings table

121 individual vendor listings across four markets, each with the date it was captured. Same dimensional columns as the main table, plus vendor, vendor_country, url, sku, price, currency, price_includes_vat, pack_quantity, unit_price and captured_date.

Vendor	Market	Listings	Publishes internals	Captured
Salesbridges	Netherlands	69	almost all	2026-07-27
Plastic Box Shop	UK	31	most	2026-07-27
Yosibox	Israel	12	3	2026-07-23
Hudson Exchange	US	9	none	2026-07-27

usable_ratio on this table is computed from each listing's own stated capacity and external dimensions — so it shows what each vendor claims, not what the typical table concluded. The spread is the useful part:

	n	min	median	max
Attached-lid containers	16	52 %	71 %	81 %
Euro stacking containers	101	56 %	78 %	99 %
VDA KLTs	3	66 %	70 %	70 %

Three things fall out of that, all of which shaped the main table:

• The ~6-point gap between tapered and straight-walled is real and consistent across three independent markets. It is the single most important number here.
• Vendor nominal litres run optimistic. Several UK Euro listings claim 83 % of external volume, which the published internal dimensions on the same page do not support. This is why containers.csv derives Euro capacities from internal dimensions rather than trusting the marketed litre figure.
• The extremes are shape, method, and occasionally a typo. The 52 % is a small tote where walls are a large fraction of the volume. The Euro maximum of 99 % is a single Salesbridges listing whose stated litres contradict the internal dimensions printed beside them; the rest of their high ratios are real but computed geometrically from the top opening rather than measured. All are kept in — the point of this table is to show what vendors say, not to launder it.

Note that the Hudson Exchange sizes are US-market footprints (21.9 × 15.2 in ≈ 55.6 × 38.6 cm), not 600 × 400 Euro modules. They are included because they are the same product class and corroborate the ALC ratio independently of the European supply chain — not because they are interchangeable with a Eurobox.

Raw captures are in raw/, trimmed to the fields used. Re-fetching those is the only way to refresh the table; the build script never touches the network, so a rebuild always reproduces the same rows.

Quick start

from datasets import load_dataset

ds = load_dataset("danielrosehill/storage-container-dimensions", split="train")

# What does a 60x40x23 Eurobox actually hold?
box = next(r for r in ds if r["id"] == "euro-600x400x230")
print(box["typical_capacity_l"], "L usable vs", box["external_volume_l"], "L external")
# 42.0 L usable vs 55.2 L external

# Straight-walled vs tapered, same footprint
for r in ds:
    if r["external_length_cm"] == 60 and r["external_width_cm"] == 40:
        print(f'{r["id"]:22} {r["usable_ratio"]:.0%} usable')

# What did the 42 L figure get generalised from?
obs = load_dataset("danielrosehill/storage-container-dimensions", "listings", split="train")
for r in obs:
    if r["external_length_cm"] == 60 and r["external_height_cm"] == 23:
        print(r["vendor"], r["stated_capacity_l"], "L", r["captured_date"], r["url"])

Or just pandas.read_csv the files — 48 and 121 rows.

Sources

Assembled from vendor catalogues and standards documentation, verified 27 July 2026:

• salesbridges.eu (NL/EU retail) — the widest published set of internal dimensions of any vendor here: 70 of 98 listings in their plastic-crates category, measured at the top opening. Prices in EUR ex-VAT. Their storefront runs on Lightspeed eCom, which serves any category or product page as JSON if you append ?format=json — see scripts/capture_salesbridges.py.
• plasticboxshop.co.uk (UK retail) — Euro and ALC ranges with published internal dimensions and nominal capacities. Their Shopify storefront exposes the full catalogue at /collections/{handle}/products.json.
• hudsonex.com (US retail, Hudson Exchange) — attached-lid totes on US-market footprints, dimensions in inches and capacity in US gallons. Also Shopify. The product copy confirms the tapered-wall / nesting behaviour but publishes no internal dimensions.
• yosibox.com (Israeli retail) — G- and T-series industrial boxes with published internal dimensions; the primary cross-check on the 600 × 400 internal rule.
• IPL Schoeller (iplschoeller.com) — the Kaiman ALC height grid. Their product pages publish external dimensions only.
• VDA 4500 v3.1 (December 2025) — KLT footprints, the three system heights, the 15 mm insertion depth, and the R-KLT 6429 figures.
• ISO 3394 / EN 13199 — the packaging module and the small-load-carrier cap, via secondary summaries; both are paid publications.

Related

• eurobox-calculator — the calculator this data was built for: usable capacity, pallet and 20 ft container loads, and cost per usable litre across both families.
• storage-box-3d-models — true-scale GLB models of several of these units, CC BY 4.0.
• eurobox-standard — VDA 4500 itself plus a human-readable digest.

Longer notes that did not fit the card:

• guidance/internal-dimensions.md — why vendors disagree about the inside of the same box, with the per-vendor evidence.
• guidance/naming.md — what these boxes are called in each market, which of those names are evidenced here, and the two that mislead.
• guidance/eurobox-vs-alc-same-size.md — what the ALC taper actually costs you, worked through.

Regenerating

containers.csv, containers.jsonl and this card's YAML frontmatter are all produced by build.py, which holds the internal-dimension rules in one place so a rule change cannot leave them disagreeing. Edit the rules there, not the CSV.

python3 build.py                         # listings.csv, containers.*, this frontmatter
python3 scripts/build_reference_pdf.py   # reference/storage-container-reference.pdf
python3 scripts/capture_salesbridges.py  # only if you want to re-fetch raw/

build.py runs build_listings.py first, so the typical rows can count the vendors and listings behind them. Only scripts/capture_salesbridges.py touches the network. The PDF needs reportlab (pip install -r scripts/requirements.txt); rerun it after build.py, since it renders the CSVs rather than recomputing anything.

container_stats.py holds the per-vendor internal-dimension statistics that both build.py and the PDF report as fact, so the two cannot disagree about what a vendor publishes.

The frontmatter declares the column schema explicitly. Left to infer types from the CSV, the Hub reads a mostly-blank column such as notes as all-null, which breaks load_dataset for anyone reading that field — so the schema is written by the same run that writes the data.

Licence

CC BY 4.0. Dimensional facts are not themselves copyrightable; the licence covers the compilation, the derived figures and the documentation.